Backflow Prevention Testing and Compliance

FCWS uses a third-party vendor, The Compliance Engine (TCE), to manage backflow prevention notifications and test results. Customers requiring annual backflow testing will receive a separate notification outlining the testing requirement and applicable due date. Certified Backflow Assembly Testers (CBATs) are responsible for submitting all test results electronically through www.thecomplianceengine.com.

Testable Backflow Prevention Assembly Procedures

  1. Notification: Receive notice from The Compliance Engine that your annual testing renewal date is upcoming.
  2. Schedule Test: Hire a CBAT to test your Backflow Prevention Assembly. A directory of certified testers is available at Georgia Association of Water Professionals.
  3. Record Test Results: The CBAT will test and record the results, showing whether your backflow prevention device passed or failed.
  4. Make Repairs, if Necessary: If the device does not pass, the CBAT will explain what repairs are needed to bring it into compliance. A passing Backflow Test must be provided to satisfy the testing requirement. If the BPA fails, the required repairs must be completed within 10 days and the assembly must be retested until a passing result is obtained.
  5. Submit Test Report: The results shall be submitted by the CBAT using The Compliance Engine (TCE). For submittal instructions for TCE, click here. The report must include the information required by 28-126(b)(3), including:
  • Customer name and service address.
  • BPA location.
  • Service type, meter size, and meter number.
  • BPA make, model, and serial number.
  • Date of testing.
  • Test results.
  • Description of any required repairs or service.
  • Expected and/or completed repair date, if the BPA failed.
  • Certified tester's name, certification number, and signature.
  • Test kit manufacturer and serial number.